11185705 Danfoss OMPX200 Rear Port
It's a Danfoss OMPX200 Rear Port replacement motor.
Supersedes 11084458
| Type | OMPX |
| Displacement | 200 |
| Shaft | 25MM Cylindrical |
| Flange | A2 (2 Bolt 106.1 pcd) |
| Port Position | End |
| Shaft Seal | High Pressure |
| Case Drain | Yes |
| Type | Geometric displacement (cm3 /rev.) |
Max. speed (rpm) |
Max. torque (N•m) |
Max. output (kW) |
Max. pressure (MPa) |
Max. flow (L/min) |
Weight (kg) | |
|
BMP BMPH BMPW 200 |
194.5 | cont. | 310 | 360 | 10.0 | 14 | 60 | 6.4 |
| int. | 385 | 440 | 12.0 | 17.5 | 75 | |||
| peak | -- | 540 | -- | 22.5 | -- |
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
Our selection OMP Danfoss - Ø25 - rear ports
Engine OMP 50 Danfoss 151-5191 - sh
cylindrical shaft Ø25 mm Flange Sae
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5191
Engine OMP 80 Danfoss 151-5192 - sh
cylindrical shaft Ø25 mm Flange SAE
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5192
Engine OMP 100 Danfoss 151-5193 - s
cylindrical shaft Ø25 mm Flange Sae
A 2 bolt - centring 82.5 mm Rear ports
BSP1/2 ref Danfoss 151-5193
Engine OMP 200 Danfoss 151-5196 - s
cylindrical shaft Ø25 mm Flange SAE
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5196
Engine OMP 250 Danfoss 151-5197 - s
cylindrical shaft Ø25 mm Flange Sae
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5197
Engine OMP 315 Danfoss 151-5198 - s
cylindrical shaft Ø25 mm Flange Sae
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5198
TEL：
Email：
Address:
Landline:+86(311)68123061
Shijiazhuang Hanjiu Technology Co.,Ltd Privacy Policy