When using the hydraulic motor produced by Hanjiu Technology Co., Ltd., some people may find that there are some large and small problems with the motor，needs to hydraulic solutions . At this time, everyone will suspect that the actual product of the Hanjiu brand does not match the publicity, because we promise that the life of the motor is longer than Other brands are longer. But the editor wants to tell you that the service life of the motor is not only related to the quality. According to relevant statistics, the motor failure rate in the market is very high, and there are many failures of the motors of some well-known brands. Therefore, the correct use of the motor is an important factor that directly affects the working life of the motor. If you want to make your motor last longer, please read the following carefully.
After the hydraulic motor is installed, its matching system should be equipped with a corresponding oil filter to ensure the cleanliness of the system oil. The hydraulic circuit must be equipped with a cooling system to prevent excessive oil temperature. Pressure gauges and thermometers must be installed in the oil inlet line.
The pressure gauge should be installed in the hydraulic circuit of the hydraulic pump. There are also some requirements for hydraulic oil. Because of different ambient temperatures and uses, hydraulic oil should have good viscosity, temperature performance, and good defoaming performance, as well as anti-oxidation, anti-rust, high flash point and other functions. Hanjiu Technology recommends that you use YB-N46 and YB-N68 anti-wear hydraulic oil.
If for some reason the hydraulic system is disassembled and needs to be reinstalled, before installation, check the motor for damage, and drain and flush the oil stored for a long time to prevent the internal moving parts from sticking. The motor mounting bracket must have sufficient rigidity to prevent shock and vibration during rotation, and the bolts connecting all parts must be tightened evenly.
It should be noted that the hydraulic motors of the BM series cannot be operated under the working conditions of the pump and cannot be used as a pump. When installing, it should be determined whether the surface is flat, whether the dimensions of the connecting flange, stop point and output connecting shaft are accurate, and ensure that the output shaft and the device connected to the transmission have good concentricity. When installing the output shaft, axial thrust of the output shaft and interlock must be prevented.
Since the motor is a very precise part, you should install it carefully, do not hit the screws and the back cover at the rear of the motor, and do not install it with force or twist it. Do not remove the plastic plug above until piping and tubing are installed.
After purchasing the products of Hanjiu Technology, if you have any unclear questions, you can ask the customer service staff in advance to prevent unnecessary losses. Finally, you are welcome to buy hydraulic products from Hanjiu Technology Co., Ltd. We produce high-quality, low-cost replacement motors for big brands, and we also innovate and develop new hydraulic products with more useful value!
hydraulic solutions near me
hydraulic solutions gladstone
hydraulic solutions dunedin
hydraulic solutions and sales
advanced hydraulics vancouver wa
hl001-7057
hydraulic flow meter hire
hydraulic repairs