Home
>Product
>Hydraulic Motor
>BMS Hydraulic Orbital Motor
> Maintenance Danfoss Hydraulic Motor Omsw125 151f0523 Wheel EngineHydraulic Maintenance Motor Danfoss Omsw125 151f0523 Wheel Engine Φ32mm Shaft Side Port
Product details:
Output volume (cc/rev):125,7
Shaft Ø (mm):32
Max. speed (rpm):600
Torque max. (Nm):375
Power max. (kW):18,0
Pressure difference (bar):210
Inlet pressure (bar):230
Volume flow max. (l/min):75
Motor version:with check valves
Connection:G 1/2"
Leak oil connection:G 1/4"
L (mm):137
L1 (mm):21,8
Danfoss reference no.:151F0523
| Type | Geometric displacement (cm3 /rev.) |
Max. speed (rpm) |
Max. torque (N•m) |
Max. output (kW) |
Max. pressure (MPa) |
Max. flow (L/min) |
Max. inlet pressure (MPa) | Weight (kg) | |
|
BMSY BMSYS 125 |
125 | cont. | 600 | 365 | 18 | 20.5 | 75 | 25 | 10.3 |
| int. | 720 | 480 | 23 | 27.5 | 90 | 30 | |||
| peak | -- | -- | -- | 29.5 | -- | -- |
* Continuous pressure :Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
The recessed mounting flange of a wheel motor makes it possible to fit into a wheel hub or winch drum so that the radial load acts midway between the two motor bearings. This gives the best utilisation of the bearing capacity and is a very compact solution.
TEL：
Email：
Address:
Landline:+86(311)68123061
Shijiazhuang Hanjiu Technology Co.,Ltd Privacy Policy